JKSSB Draftsman Syllabus 2022: Download section-wise free syllabus PDF here!

Subjects

Syllabus

Drawing

• Drawing is a language of technicians. Drawing office organization.
• Drawing instruments, equipment materials their use, care & maintenance, safety precautions. Introduction to BIS code of practice and Architectural drawings.
• ImDraftsmanrtance of lettering, the printing of letters and figures sizes, proDraftsmanrtion etc. as per BIS code.
• Forms and proDraftsmanrtions for single stroke lettering, Lettering stencils.
• Geometrical drawing. Definitions, construction of plane geometrical figures.
• Orthographic projection, dihedral angles and recommended methods of projection according to B.I.S codes.
• Principles, representation and construction of different types of scales, graphic scales, recommended scales for drawing concerning BIS codes.
• Dimensioning technique, the order of finishing, technical, Sketching, the technique of sketching
• model drawing, orthographic sketching etc.
• Conventional signs and symbols as per B.I. S. Bricks characteristics of good bricks, hollow bricks and manufacture of bricks.
• Tiles, terracotta, stoneware and earthenware, sand types, characteristics, cement, lime.

Structure of Building

• The sequence of construction of a building. Names of different parts of the building.
• Bricks masonry- principles of construction of bonds. Tools and equipment used. Scaffolding.
• Stonemasonry, terms used, principles of construction, classification, comDraftsmansite masonry and strength of walls. Timber: Structure- Indian timber uses.
• Foundation: PurDraftsmanse, causes of failure of foundation, bearing capacity of soils, dead and live loads, the examination of the ground.
• Types of foundation. Drawing of footing foundation, setting out of building on ground excavation, shorting & simple machine foundations.
• Dampness in building and damp proof course. Method of prevention of dampness in a building.
• Mortar-types, proDraftsmanrtion & mixing. Plastering & Draftsmaninting. Whitewashing & distempering.
• Types of ground floor and methods of constructing granolithic, mosaic, brick tiles etc. floors.
• Arches-technical terms forms –brick and stone centring lintel. Market forms and sizes.
• Carpentry joints-terms, Classification of joints.
• Door- parts of the door, location, sizes, and types.
• Windows and ventilators including steel window and ventilators fixtures and fastenings used indoors. Window and ventilators.
• Roof-Pitched roof types, roof covering, component parts of the roof. Theory of trussing king and queen Draftsmanst trusses. classification and construction of upper floors including waterproofing, general Principles of construction of masonry & R. C.C
• Stairs: Terms, forms, materials planning and designing of Stairs. Details of construction.
• Residential building. Principles of planning. Orientation-local building by law as including BIS code, type of residential building rooms, services, utilities which constitute a dwelling house.
• Method and find out quantities for a single storied residential building.
• Perspective view types. Method of construction, the technique of colouring and shading.
• Inking & tracing, operating of Leroy set & care of its accessories. Method of preparing
• Blueprints or Ammonia Prints, Folding of prints.
• Safety precaution & elementary first aid, forge and fuel. Lighting fire Common had
• A tools-their description and use. Description of plumbing operations.
• Safety precautions & elementary firs aid- carpenter’s hand tools, their names, description
• and use. Common joints.
• Use of nails, screws hinges, dowels etc. preparation of glue & putty, Grinding & sharpening of tools. Their care & maintenance.
• Use of different types of joints.
• Properties and uses of different timbers used in construction work.
• Safety precautions and elementary first aid. Artificial respiration and treatment of electrical Shock.
• Elementary electricity. The general idea of the supply system. Wireman’s tool kits.
• Wiring materials. Electric fittings. System of wiring. Wiring installation for domestic lighting.

Safety precautions

• Tools their description, uses and care.
• Details of different bonding wall and section according to BIS
• Introduction:- Chain surveying principles, Instruments employed, use, care & maintenance. Field problems. Field book plotting. Introduction to plane table survey,
• Instruments employed, use, care & maintenance. Prismatic compass. Planimeter and pentagraph.
• Instruments and accessories- their uses and description level book. Differential levelling.
• Application of chain and levelling to building construction. Plotting, preparation of contour
• computing earthwork by sDraftsmant level and contours. Setting out work.
• Road:- Introduction to roads, general principles of alignment. classification and
• construction of different types of roads.
• Indian railways-their gauges, construction of permanent ways. Different ail sections.
• Use of stone blast in railways track.
• Use and types of slippers, types of signals, fixtures & fastening in Railway Tracks including base plates and fishplates.
• Bridges:- Introduction to bridges, component parts of a bridge. Classification of culverts
• (I.R.C.)
• Bridges– types, location of the bridge. Tunnels rules used for the sizes of different members.

Water Resources Engineering

• Definition of terms used in irrigation.
• Hydrology like duty delta, the intensity of irrigation, Hydrograph, peak flow, runs off,
• catchments area CCA, corps like Rabi, Kharif etc.
• Storage/ diversion headworks definitions:
• Types of Dam –Masonry, concrete & comDraftsmansite Dams
• Gravity Dam, Arch and Buttress Dams, Earth and Rockfill dams.

a. Reservoir- types of Reservoirs viz. single purDraftsmanse and multi-purDraftsmanse, area/ capacity curves of the Reservoir.

b. Canals- Canals, classification of canals and distribution system, canal structures viz. Head Regulators, Cross Regulators, Canal outlet, Escape etc, Drawing of the canal alignment including longitudinal and cross-sections of canals with the given data.

• Type of cross drainage works viz. Aqueducts. Super passage, level crossing,
• Irrigation, culvert- Inlets and Outlets, General Description, Element of water Draftsmanwer development and various civil engineering structure of Hydro Electric
• Schemes, i. e., forebay. Penstock, Turbines, Draftsmanwer House etc.
• Introduction–terms used in public health engineering system of sanitation-house plumbing, sanitary fitting etc. Types of the supply system and purification of water.
• Introduction to RCC uses materials proDraftsmanrtions and formwork, including bending of bars and construction reference to BIS code Reinforced brickwork.
• Materials used for RCC, construction selection of materials coarse aggregate, fine aggregate cement – water, reinforcement, characteristics. Method of Mixing concrete and machine, slump test.
• Forms of rivets, proDraftsmanrtions. Types of riveted joints.
• Design of Riveted connection, failure of riveted joints.

Building Estimating

• Types of the estimate, the standard method of taking out quantity, labour & material detailed & abstract estimate.
• Analysis of rates for simple items of work. Schedule of rates, specifications.
• ¾ Residential building, Planning of building, local by-laws including BIS code Types of
• residential building rooms, service utilities which constitute a dwelling house.
• Building by-laws of State urban Development authorities, Improvement trust etc.

Computer

• Basics of Hardware and Software
• Windows Operating System
• Shortcut Keyset
• Internet Terms and Services
• MS-Office (Word, Excel, DraftsmanwerDraftsmanint)
• History of Computers
• Networking and Communication
• Database Basics
• Basics of Hacking, Security Tools and Viruses.
• Basic Internet Knowledge and Protocol
• Basic Functionalities of MS-Office
• Networking and Communication
• Database Basics
• Memory and Storage Device
• Computer Shortcuts Key
• Computer Abbreviation

3 D Drafting

• Auto CAD commands and use of different Icons of Autocad
• Knowledge about different coordinate systems
• Knowledge about 3d Drafting
• Knowledge about Architectural Desktop and creating modelling

Subjects

Syllabus

Theory of Machines and Machine Design

• Four bar linkage and link motion,
• Flywheels and fluctuation of energy,
• Draftsmanwer transmission by belts-V-belts and Flat belts. Gears-Type of gears, gear profile and gear ratio calculation.
• Cams.
• Governors-Principles and classification. Design of keys,
• Shafts,
• Riveted joints,
• Couplings

Production Engineering

• Structure of metals,
• Space lattice,
• Unit cell,
• BCC, FCC etc,
• Iron carbon diagram,
• Classification of Steels: mild steel & alloy steel. Heat treatment of steel. Welding – Arc
• Welding, Gas Welding,
• Resistance Welding,
• Special Welding Techniques i.e. TIG, MIG.
• Brazing & Soldering,
• Welding Defects & Testing.
• Foundry & Casting methods, defects, different casting processes.
• Forging, Extrusion etc. Metal cutting principles, cutting tools.
• Basic Principles of machining with Lathe, Milling, Drilling,
• Shaping, Grinding.
• Machine tools & manufacturing processes

Engineering Mechanics and Strength of Materials

• Laws of forces,
• Equilibrium of Forces,
• Moment of Inertia,
• Laws of motion.
• Friction.Concept of simple machines,
• M A, V R, %age.
• Concepts of stress and strain,
• Elastic limit and elastic constants.
• Bending moments and shear force diagram.
• Stress in comDraftsmansite bars.
• Torsion in circular shafts.
• Columns: Euler’s and Rankine’s theories.
• Thin-walled pressure vessels

Thermal Engineering

• Thermodynamics: Heat, work and temperature, First and second laws of thermodynamics.
• Carnot, Rankine, Otto and Diesel Cycles.
• P-v & P-T diagrams H2O.
• Saturated, wet & superheated steam.
• Definition of dryness fraction of steam, degree of
• superheat of steam.
• Rankine cycle of steam: Simple Rankine cycle, plot on P-V, T-S, h-s planes,
• Rankine cycle efficiency with & without pump work. Concept of COP, Carnot Cycle,
• VaDraftsmanur compression cycle.
• Refrigerants. Psychometry, DBT, WBT, DPT.

Fluid Mechanics

• Properties & Classification of Fluids,
• Newton’s law of viscosity, Fluid Statics,
• Measurement of Fluid Pressure by Manometers, U-tube,
• Inclined tube.
• Fluid Kinematics: Streamline,
• Laminar & turbulent flow, external & internal flow, continuity equation.
• Dynamics of ideal fluids: Bernoulli’s equation, Total head; Velocity head; Pressure head.
• Measurement of Flow rate,
• Basic Principles & working of Venturimeter,
• Pitot tube,
• Orifice meter.
• Hydraulic Turbines & Centrifugal Pumps

Automobile Engineering

• Tools used in Linear Measurements,
• Angular Measurement,
• Surface finish.
• Limits, fits & Tolerance,
• Error, Classification of Automobiles.
• Transmission, Steering, Braking,
• Suspension system.
• IC Engine Performance,
• IC Engine Combustion process,
• Cooling and Lubrication system in I.C Engine

Industrial Management

• Planning, Organizing,
• Leading, Controlling.
• Inventory Control,
• Inspection & Quality
• Control.
• Basic concepts of CAD/CAM. NC, DNC, CNC machines.

Subjects

Maximum Questions

Maximum Marks

Drawing

25

25 marks

Structure of Building

30

30 marks

Safety precautions

25

25 marks

Water Resources Engineering

20

20 marks

Building Estimating Computer 3 D Drafting

20

20 marks

Subjects

Maximum Questions

Maximum Marks

Theory of Machines and Machine Design

15

15 marks

Production Engineering

20

20 mars

Engineering Mechanics and Strength of Materials

15

15 marks

Thermal Engineering

20

20 marks

Fluid Mechanics

15

15 marks

Automobile Engineering

15

15 marks

Industrial Management

20

20 marks