NCERT Class 12 Books Physics Chapter 6- Electromagnetic Induction

Safalta Expert Published by: Noor Fatima Updated Fri, 24 Jun 2022 11:47 PM IST

Highlights

Here is the information about NCERT Books Class 12 Physics Chapter 6. You can give a read to this blog and get PDFs of the subject. 
 

Free Demo Classes

Register here for Free Demo Classes

Please fill the name
Please enter only 10 digit mobile number
Please select course
Please fill the email
Something went wrong!
Download App & Start Learning
NCERT Books Class 12 Physics Chapter 6- Electromagnetic Induction is accessible here for download purposes. You can download the PDF for and learn from the book anytime you want. Students who are studying in Class 12 and candidates who are preparing for competitive exams can download the PDF for NCERT Books Class 12 Physics Chapter 6- Electromagnetic Induction to learn from the reading material.  

Taking these course books as a reference can be really helpful to prepare for any sought exam. You can keep the digital form of the book handy and learn from it without any time constraints.

At safalta, you can access FREE E-BOOKS.

Source: safalta.com

These books are not just free of cost, but they are also packed with ample knowledge and information related to your studies.


We also provide FREE MOCK PAPERS, which can help you test your own yourself. These papers can help you prepare for your exams in a better way.

Here, you can learn the NCERT Books Class 12 Physics Chapter 6- Electromagnetic Induction. Moreover, you can get the links for other chapters to download the links. 

The Chapter goes like this-


INTRODUCTION

Electricity and magnetism were considered separate and unrelated phenomena for a long time. In the early decades of the nineteenth century, experiments on electric current by Oersted, Ampere and a few others established the fact that electricity and magnetism are inter-related. They found that moving electric charges produce magnetic fields. For example, an electric current deflects a magnetic compass needle placed in its vicinity. This naturally raises the questions like: Is the converse effect possible? Can moving magnets produce electric currents? Does the nature permit such a relation between electricity and magnetism? The answer is resounding yes!

The experiments of Michael Faraday in England and Joseph Henry in USA, conducted around 1830, demonstrated conclusively that electric currents were induced in closed coils when subjected to changing magnetic fields. In this chapter, we will study the phenomena associated with changing magnetic fields and understand the underlying principles. The phenomenon in which electric current is generated by varying magnetic fields is appropriately called electromagnetic induction. When Faraday first made public his discovery that relative motion between a bar magnet and a wire loop produced a small current in the latter, he was asked, “What is the use of it?” His reply was: “What is the use of a new born baby?” The phenomenon of electromagnetic induction is not merely of theoretical or academic interest but also of practical utility. Imagine a world where there is no electricity – no electric lights, no trains, no telephones and no personal computers. The pioneering experiments of Faraday and Henry have led directly to the development of modern day generators and transformers. Today’s civilisation owes its progress to a great extent to the discovery of electromagnetic induction.
 

THE EXPERIMENTS OF FARADAY AND HENRY

The discovery and understanding of electromagnetic induction are based on a long series of experiments carried out by Faraday and Henry. We shall now describe some of these experiments.

Experiment 6.1 Figure 6.1 shows a coil C1 * connected to a galvanometer G. When the North-pole of a bar magnet is pushed towards the coil, the pointer in the galvanometer deflects, indicating the presence of electric current in the coil. The deflection lasts as long as the bar magnet is in motion. The galvanometer does not show any deflection when the magnet is held stationary. When the magnet is pulled away from the coil, the galvanometer shows deflection in the opposite direction, which indicates reversal of the current’s direction. Moreover, when the South-pole of the bar magnet is moved towards or away from the coil, the deflections in the galvanometer are opposite to that observed with the North-pole for similar movements. Further, the deflection (and hence current) is found to be larger when the magnet is pushed towards or pulled away from the coil faster. Instead, when the bar magnet is held fixed and the coil C1 is moved towards or away from the magnet, the same effects are observed. It shows that it is the relative motion between the magnet and the coil that is responsible for generation (induction) of electric current in the coil.

Experiment 6.2 In Fig. 6.2 the bar magnet is replaced by a second coil C2 connected to a battery. The steady current in the coil C2 produces a steady magnetic field. As coil C2 is moved towards the coil C1 , the galvanometer shows a deflection. This indicates that electric current is induced in coil C1 . When C2 is moved away, the galvanometer shows a deflection again, but this time in the opposite direction. The deflection lasts as long as coil C2 is in motion. When the coil C2 is held fixed and C1 is moved, the same effects are observed. Again, it is the relative motion between the coils that induces the electric current.

Experiment 6.3 The above two experiments involved relative motion between a magnet and a coil and between two coils, respectively. Through another experiment, Faraday showed that this relative motion is not an absolute requirement. Figure 6.3 shows two coils C1 and C2 held stationary. Coil C1 is connected to galvanometer G while the second coil C2 is connected to a battery through a tapping key K.

It is observed that the galvanometer shows a momentary deflection when the tapping key K is pressed. The pointer in the galvanometer returns to zero immediately. If the key is held pressed continuously, there is no deflection in the galvanometer. When the key is released, a momentory deflection is observed again, but in the opposite direction. It is also observed that the deflection increases dramatically when an iron rod is inserted into the coils along their axis.

6.3 MAGNETIC FLUX Faraday’s great insight lay in discovering a simple mathematical relation to explain the series of experiments he carried out on electromagnetic induction. However, before we state and appreciate his laws, we must get familiar with the notion of magnetic flux, Φ B . Magnetic flux is defined in the same way as electric flux is defined in Chapter 1. Magnetic flux through a plane of area A placed in a uniform magnetic field B (Fig. 6.4) can be written as

Φ B = B . A = BA cos θ (6.1)
where θ is angle between B and A. The notion of the area as a vector has been discussed earlier in Chapter 1. Equation (6.1) can be extended to curved surfaces and nonuniform fields. If the magnetic field has different magnitudes and directions at various parts of a surface as shown in Fig. 6.5, then the magnetic flux through the surface is given by

ΦB = + + B A B A 1 1 2 2 . . d d ... = B A .i i d all ∑ (6.2)
where ‘all’ stands for summation over all the area elements dAi comprising the surface and Bi is the magnetic field at the area element dAi . The SI unit of magnetic flux is weber (Wb) or tesla meter squared (T m2 ). Magnetic flux is a scalar quantity.


FARADAY’S LAW OF INDUCTION

From the experimental observations, Faraday arrived at a conclusion that an emf is induced in a coil when magnetic flux through the coil changes with time. Experimental observations discussed in Section 6.2 can be explained using this concept. The motion of a magnet towards or away from coil C1 in Experiment 6.1 and moving a current-carrying coil C2 towards or away from coil C1 in Experiment 6.2, change the magnetic flux associated with coil C1 . The change in magnetic flux induces emf in coil C1 . It was this induced emf which caused electric current to flow in coil C1 and through the galvanometer. A plausible explanation for the observations of Experiment 6.3 is as follows: When the tapping key K is pressed, the current in coil C2 (and the resulting magnetic field) rises from zero to a maximum value in a short time. Consequently, the magnetic flux through the neighbouring coil C1 also increases. It is the change in magnetic flux through coil C1 that produces an induced emf in coil C1 .

When the key is held pressed, current in coil C2 is constant. Therefore, there is no change in the magnetic flux through coil C1 and the current in coil C1 drops to zero. When the key is released, the current in C2 and the resulting magnetic field decreases from the maximum value to zero in a short time. This results in a decrease in magnetic flux through coil C1 and hence again induces an electric current in coil C1 *. The common point in all these observations is that the time rate of change of magnetic flux through a circuit induces emf in it. Faraday stated experimental observations in the form of a law called Faraday’s law of electromagnetic induction. The law is stated below.

The magnitude of the induced emf in a circuit is equal to the time rate of change of magnetic flux through the circuit. Mathematically, the induced emf is given by
d – d B t Φ ε = (6.3)
The negative sign indicates the direction of ε and hence the direction of current in a closed loop. This will be discussed in detail in the next section. In the case of a closely wound coil of N turns, change of flux associated with each turn, is the same. Therefore, the expression for the total induced emf is given by

d – d B N t Φ ε = (6.4)
The induced emf can be increased by increasing the number of turns N of a closed coil.

From Eqs. (6.1) and (6.2), we see that the flux can be varied by changing any one or more of the terms B, A and θ. In Experiments 6.1 and 6.2 in Section 6.2, the flux is changed by varying B. The flux can also be altered by changing the shape of a coil (that is, by shrinking it or stretching it) in a magnetic field, or rotating a coil in a magnetic field such that the angle θ between B and A changes. In these cases too, an emf is induced in the respective coils.


LENZ’S LAW AND CONSERVATION OF ENERGY

In 1834, German physicist Heinrich Friedrich Lenz (1804-1865) deduced a rule, known as Lenz’s law which gives the polarity of the induced emf in a clear and concise fashion. The statement of the law is:

The polarity of induced emf is such that it tends to produce a current which opposes the change in magnetic flux that produced it.

The negative sign shown in Eq. (6.3) represents this effect. We can understand Lenz’s law by examining Experiment 6.1 in Section 6.2.1. In Fig. 6.1, we see that the North-pole of a bar magnet is being pushed towards the closed coil. As the North-pole of the bar magnet moves towards the coil, the magnetic flux through the coil increases. Hence current is induced in the coil in such a direction that it opposes the increase in flux. This is possible only if the current in the coil is in a counter-clockwise direction with respect to an observer situated on the side of the magnet. Note that magnetic moment associated with this current has North polarity towards the North-pole of the approaching magnet. Similarly, if the Northpole of the magnet is being withdrawn from the coil, the magnetic flux through the coil will decrease. To counter this decrease in magnetic flux, the induced current in the coil flows in clockwise direction and its Southpole faces the receding North-pole of the bar magnet. This would result in an attractive force which opposes the motion of the magnet and the corresponding decrease in flux.

What will happen if an open circuit is used in place of the closed loop in the above example? In this case too, an emf is induced across the open ends of the circuit. The direction of the induced emf can be found using Lenz’s law. Consider Figs. 6.6 (a) and (b). They provide an easier way to understand the direction of induced currents. Note that the direction shown by and indicate the directions of the induced currents.

A little reflection on this matter should convince us on the correctness of Lenz’s law. Suppose that the induced current was in the direction opposite to the one depicted in Fig. 6.6(a). In that case, the South-pole due to the induced current will face the approaching North-pole of the magnet. The bar magnet will then be attracted towards the coil at an ever increasing acceleration. A gentle push on the magnet will initiate the process and its velocity and kinetic energy will continuously increase without expending any energy. If this can happen, one could construct a perpetual-motion machine by a suitable arrangement. This violates the law of conservation of energy and hence can not happen.

Now consider the correct case shown in Fig. 6.6(a). In this situation, the bar magnet experiences a repulsive force due to the induced current. Therefore, a person has to do work in moving the magnet. Where does the energy spent by the person go? This energy is dissipated by Joule heating produced by the induced current.


MOTIONAL ELECTROMOTIVE FORCE

Let us consider a straight conductor moving in a uniform and timeindependent magnetic field. Figure 6.10 shows a rectangular conductor PQRS in which the conductor PQ is free to move. The rod PQ is moved towards the left with a constant velocity v as shown in the figure. Assume that there is no loss of energy due to friction. PQRS forms a closed circuit enclosing an area that changes as PQ moves. It is placed in a uniform magnetic field B which is perpendicular to the plane of this system. If the length RQ = x and RS = l, the magnetic flux ΦB enclosed by the loop PQRS will be

ΦB = Blx
Since x is changing with time, the rate of change of flux ΦB will induce an emf given by:
( ) – d d – d d B Blx t t Φ ε = = = d – d x Bl Blv

where we have used dx/dt = –v which is the speed of the conductor PQ. The induced emf Blv is called motional emf. Thus, we are able to produce induced emf by moving a conductor instead of varying the magnetic field, that is, by changing the magnetic flux enclosed by the circuit.

It is also possible to explain the motional emf expression in Eq. (6.5) by invoking the Lorentz force acting on the free charge carriers of conductor PQ. Consider any arbitrary charge q in the conductor PQ. When the rod moves with speed v, the charge will also be moving with speed v in the magnetic field B. The Lorentz force on this charge is qvB in magnitude, and its direction is towards Q. All charges experience the same force, in magnitude and direction, irrespective of their position in the rod PQ. The work done in moving the charge from P to Q is,
W = qvBl Since emf is the work done per unit charge,
W q ε =
= Blv This equation gives emf induced across the rod PQ and is identical to Eq. (6.5). We stress that our presentation is not wholly rigorous. But it does help us to understand the basis of Faraday’s law when the conductor is moving in a uniform and time-independent magnetic field.

On the other hand, it is not obvious how an emf is induced when a conductor is stationary and the magnetic field is changing – a fact which Faraday verified by numerous experiments. In the case of a stationary conductor, the force on its charges is given by

F = q (E + v × B) = qE (6.6)
since v = 0. Thus, any force on the charge must arise from the electric field term E alone. Therefore, to explain the existence of induced emf or induced current, we must assume that a time-varying magnetic field generates an electric field. However, we hasten to add that electric fields produced by static electric charges have properties different from those produced by time-varying magnetic fields. In Chapter 4, we learnt that charges in motion (current) can exert force/torque on a stationary magnet. Conversely, a bar magnet in motion (or more generally, a changing magnetic field) can exert a force on the stationary charge. This is the fundamental significance of the Faraday’s discovery. Electricity and magnetism are related. 


ENERGY CONSIDERATION: A QUANTITATIVE STUDY

In Section 6.5, we discussed qualitatively that Lenz’s law is consistent with the law of conservation of energy. Now we shall explore this aspect further with a concrete example.
Let r be the resistance of movable arm PQ of the rectangular conductor shown in Fig. 6.10. We assume that the remaining arms QR, RS and SP have negligible resistances compared to r. Thus, the overall resistance of the rectangular loop is r and this does not change as PQ is moved. The current I in the loop is,
I r ε =
= B l v r (6.7)
On account of the presence of the magnetic field, there will be a force on the arm PQ. This force I (l × B), is directed outwards in the direction opposite to the velocity of the rod. The magnitude of this force is,
F = I l B = 2 2 B l v r
where we have used Eq. (6.7). Note that this force arises due to drift velocity of charges (responsible for current) along the rod and the consequent Lorentz force acting on them.
Alternatively, the arm PQ is being pushed with a constant speed v, the power required to do this is,
P F v = = 2 2 2 B l v r (6.8)
The agent that does this work is mechanical. Where does this mechanical energy go? The answer is: it is dissipated as Joule heat, and is given by
2 P I r J = =       Blv r r 2 2 2 2 B l v r =
which is identical to Eq. (6.8).

Thus, mechanical energy which was needed to move the arm PQ is converted into electrical energy (the induced emf) and then to thermal energy.
There is an interesting relationship between the charge flow through the circuit and the change in the magnetic flux. From Faraday’s law, we have learnt that the magnitude of the induced emf is,
B t Φ ε ∆ = ∆
However, Q Ir r t ε ∆ = = ∆
Thus, B

To get the complete NCERT Class 12 Physics book, check the PDF link below. 

NCERT Books Class 12 Physics Chapter 6- Electromagnetic Induction- PDF Download

Chapter 6- Electromagnetic Induction

अध्याय 6 वैद्युतचुंबकीय प्रेरण
  Safalta provides the latest NCERT course books for all the major subjects of Class 12. A team of proficient teachers drafts these matters in a precise and thorough manner. You can download the PDFs for all the subjects in a chapter-wise format.

These Books are very effective in preparing for annual exams. Here is the PDF for NCERT Books Class 12 Physics Chapter 6- Electromagnetic Induction.
 

Where can you download NCERT Books Class 12 Physics Chapter 6 PDF?

Candidates can download NCERT Books Class 12 Physics Chapter 6- Electromagnetic Induction PDF for free on our page. Links are given below.

Chapter 6- Electromagnetic Induction

अध्याय 6 वैद्युतचुंबकीय प्रेरण

Why is NCERT Books Class 12 Physics the best study material?

The book can also help in clarifying doubts. Other benefits of studying from the NCERT Books Class 12 Physics are-
  • Students gain profound knowledge about Physics through the NCERT Books Class 12 Physics
  • The course books contain pictures that can help students in better understanding of the chapters
  • These books can help students in self-study

Why is NCERT Books Class 12 Physics so recommended for board exams?

Almost all the questions that appear in board exams are from NCERT Books Class 12 Science. Moreover, a team of professional teachers drafts these books, which become a reliable source of study for students.
 

Are CBSE Books for Class 12 Physics important from an examination perspective?

The chapters in CBSE Books for Class 12 Physics are vital for board exams and higher classes. Students should read the chapter given in the CBSE books for Class 12 Science. These stories and practice questions can help gain excellent marks.

To get outstanding marks, we provide mock test papers that can help gear-up your preparations for exams. Additionally, you can also download e-books to get yourself prepared even in a better way.

Free Demo Classes

Register here for Free Demo Classes

Trending Courses

Professional Certification Programme in Digital Marketing (Batch-5)
Professional Certification Programme in Digital Marketing (Batch-5)

Now at just ₹ 49999 ₹ 9999950% off

Master Certification Digital Marketing Program Batch-10
Master Certification Digital Marketing Program Batch-10

Now at just ₹ 64999 ₹ 12500048% off

Advanced Certification in Digital Marketing Online Programme (Batch-22)
Advanced Certification in Digital Marketing Online Programme (Batch-22)

Now at just ₹ 21999 ₹ 3599939% off

Advance Graphic Designing Course (Batch-9) : 90 Hours of Learning
Advance Graphic Designing Course (Batch-9) : 90 Hours of Learning

Now at just ₹ 16999 ₹ 3599953% off

Flipkart Hot Selling Course in 2024
Flipkart Hot Selling Course in 2024

Now at just ₹ 10000 ₹ 3000067% off

Advanced Certification in Digital Marketing Classroom Programme (Batch-3)
Advanced Certification in Digital Marketing Classroom Programme (Batch-3)

Now at just ₹ 29999 ₹ 9999970% off

Basic Digital Marketing Course (Batch-24): 50 Hours Live+ Recorded Classes!
Basic Digital Marketing Course (Batch-24): 50 Hours Live+ Recorded Classes!

Now at just ₹ 1499 ₹ 999985% off

WhatsApp Business Marketing Course
WhatsApp Business Marketing Course

Now at just ₹ 599 ₹ 159963% off

Advance Excel Course
Advance Excel Course

Now at just ₹ 2499 ₹ 800069% off