PPSC JE Syllabus 2022: Download subject-wise syllabus PDF here!

Safalta Expert Published by: Himani Mehra Updated Tue, 15 Mar 2022 08:43 AM IST

Highlights

Download PPSC JE Syllabus 2022 at Safalta. Get detailed syllabus in PDF, along with important exam topics, latest exam pattern, and much more.

Free Demo Classes

Register here for Free Demo Classes

Please fill the name
Please enter only 10 digit mobile number
Please select course
Please fill the email
Something went wrong!
Download App & Start Learning

Do you know what is the PPSC JE Syllabus? Punjab Public Service Commission (PPSC) conducts recruitment exams to select eligible and interested candidates to the post of Junior Engineers in various departments in the state. Candidates who are aspiring to appear for PPSC JE Exam should have a thorough knowledge of the PPSC JE Syllabus before starting their preparations so that candidates know the topics they have to cover during their preparation and how can they make the best use of time to cover those topics. Understanding the syllabus is one of the first steps while preparing for any competitive exam. In this article, we have explained PPSC JE Syllabus in detail for the benefit of the candidates. In addition, you can also check out our free General Awareness E-book- Download now for all competitive exams.

Download Free PPSC JE Syllabus- Click Here!


PPSC JE Syllabus 2022

In PPSC JE Exam questions are asked from Civil Engineering, Mechanical Engineering, Logical Reasoning, Mental Ability and General Knowledge. Each of these subjects has a defined list of topics which must be covered by the candidates.

Source: safalta.com

The subject-wise details of PPSC JE Syllabus are given below:

 Check out  UPCL AE Syllabus here.

PPSC JE Syllabus: Civil Engineering

Candidates who apply for Civil Engineer posts have to attempt questions from Civil Engineering section. The topics from which questions are asked in this section are as follows:

 

Section Topics
Fluid Mechanics
  • Properties of Fluids
  • Hydrostatic Pressure
  • Measurement of Pressure
  • Flow-through Pipes
  • Hydraulic Pumps and motors
  • Fundamentals of Fluid Flow
  • Chezy’s formula and Manning’s formula
Construction Materials and Building Construction
  • General characteristics of stones
  • Requirements of good building stones
  • Identification of common building stones
  • Cement, Lime, Timber and Wood-Based Products
  • Paints and Varnishes, Miscellaneous Materials etc., Introduction to Building Construction
Engineering Drawing
  • Lettering Technique and Practice
  • Dimensioning Techniques (Necessity of dimensioning, method and principles of dimensioning etc.)
  • Scales (need and importance of scales
  • Drawing of plain and diagonal scales etc.)
  • Projections
  • Sections
  • Symbols
  • Conventions
Applied Mechanics
  • Laws of forces
  • Moment
  • Friction
  • Centre of Gravity 
Earthquake Resistant Building Construction
  • Elements of Engineering Seismology
  • Performance of building during earthquakes and Mode of failure
  • Special construction method
  • Seismic Provision of Strengthening and Retrofitting Measures for Traditionally- Built Constructions, Brick and RCC Structures
  • Provision of reinforcement detailing in masonry and RC constructions.
Structural Engineering
  • Simple stresses and strains
  • Elasticity
  • Hooke’s Law
  • Moduli of Elasticity and Rigidity
  • Stresses and strains of homogeneous materials and composite sections
  • Types of beams and supports and loads
  • Concept of bending moment and shear force
  • Bending moment and shear force diagrams for simple cases
  • Deflection in beams
Soil and Foundation Engineering
  • Physical Properties of Soils
  • Classification and Identification of Soils
  • Permeability and its importance
  • Effective Stress
  • Strength Characteristics of Soils
  • Compaction
  • Bearing Capacity of soil
  • Concept of shallow and deep foundation
  • Types of shallow foundations and their suitability
  • Factors affecting the depth of shallow foundations
Water Supply and Waste Water Engineering 
  • Water Supply- Water requirement
  • Water Treatment including Sedimentation
  • Laying out Pipes Waste Water Engineering-Definition of terms in sanitary engineering
  • Surface drains
  • Types of sewage
  • Sewerage
  • Laying and Construction of Sewers
  • Sewage characteristics
  • Natural Methods of Sewage Disposal
  • Sewage Treatment
  • BOD
  • COD
  • Building Drainage
  • Drains and Sewers
  • Traps, inspection chamber,Septic Tank and Soak Pit, Bathroom and W.C connections etc.
Transportation Engineering
  • Introduction of Transportation Engineering
  • Traffic Engineering
  • Road materials
  • Geometric design
  • Design of flexible and rigid pavements
  • Road maintenance
  • Railway Engineering Rails
  • Sleepers, ballast, points and crossing
  • Track laying and track maintenance.
Environmental Engineering
  • Importance of Environmental Engineering
  • Water Pollution
  • Noise Pollution
  • Effects of mining, blasting and deforestation
  • Land Use soil degradation problems - erosion, water logging, soil pollution etc.)
  • Environmental Impact Assessment
  • Legislation to Control Environmental Pollution Renewable Source of Energy etc.
Irrigation Engineering
  • Introduction to irrigation
  • Methods of irrigation
  • Water logging
  • Design of irrigation canals and irrigation outlets.
Quantity Surbeying and Valuation
  • Introduction to quantity surveying and its importance
  • Duties of quantity surveyor
  • Types of estimates
  • Measurement
  • Preparation of detailed and abstract
  • Estimates from drawings
  • Calculation of quantities of materials
  • Analysis of rates
  • Contractorship
  • Preparation of tender document based on Common Schedule of Rates (CSR).
Repair and Maintenance of Buildings
  • Need for maintenance
  • Agencies causing deterioration (sources, causes, effects) Investigation and diagnosis of defects
  • Defects and their root causes
  • Materials for repair
  • Maintenance and protection
  • Remedial measures for building defects
  • Surface preparation techniques for repair
Basics of Management
  • Leadership
  • Motivation
  • Ethics and Values
  • Team related skills- sympathy, empathy, co-operation, concern, lead and negotiate, work well with people from culturally diverse background
  • Communication in group - conversation and listening skills
  • Task Initiation
  • Task Planning
  • Task execution.
Construction Management and Accounts
  • Construction Planning
  • CPM
  • PERT
  • Site organization
  • Construction Labour
  • Payment of Wages Act 1936
  • Minimum Wages Act 1948 (as amended)
  • Control of progress
  • Inspection and quality control
  • Accidents and safety in construction
  • Accounts
  • Public work accounts
  • Request for quotation
  • Bill of quantities
  • Measurement book
  • Indent book
  • Material at site register.


 Check out UPPCL AE Salary here.

PPSC JE Syllabus: Mechanical Engineering

 
Section Topics
Electrical Circuits and Machines
  • Concept of alternating current and voltage
  • Phasor algebra
  • AC Circuits
  • Susceptance
  • Conductance and admittance
  • Active and reactive components of current and their significance
  • Power
  • Power factor and its significance
  • Resonance in series and parallel circuits
  • Faraday’s laws, magnetization curve
  • Constructional features of generators and motors
  • D.C
  • Machine
  • Distribution and power transformer
  • 1-phase Autotransformer
  • Three Phase transforme
  • Single unit or 3 single-phase units connections
  • Vector grouping
  • Scott-connected transforme
  • 3-phase transformers in parallel.
Elements of Mechanical Engineering
  • Thermodynamics 
  • Reversible and irreversible processes
  • Entropy
  • Description of various Types of Boilers
  • Basic concepts of Thermal conduction
  • Stefan Boltzman’s laws
  • Strength of Materials
  • Concept of Bending Moment and Shear Force
  • Bending Moment and Shear Force diagrams for cantilevers, simply supported beams to concentrated loads
  • Concept of Torsion and equation of torsion for circular shaft
  • Close coiled spring for axial load, Stiffness of spring
  • Angle of twist and proof resilience.
Elements of Electrical and Electronics Engineering
  • Basic electrical quantities
  • DC Circuits
  • Ohm’s law
  • Resistances in series and parallel
  • Kirchhoff’s laws and their applications in solving electrical network problems
  • Network theorems such as Thevenin’s theorem
  • Superposition theorem
  • Maximum power transfer theorem and Norton’s theorem
  • Star-delta transformation
  • Current and voltage sources and their conversion
  • Semiconductor Theory - Atomic structure and Energy band theory, intrinsic and extrinsic semiconductors and effect of temperature on them
  • Semiconductor Diodes, operating point and effect of temperature
  • Single-Stage Transistor Amplifiers - Concept of DC and AC load line, Voltage gain, Concept of input and output impedance, AC equivalent circuit, voltage gain, Frequency RC coupled two-stage and direct coupled amplifier
  • Construction, operation, characteristics and applications of JFET and MOSFET
Manufacturing Processes
  • Dry sand and green sand casting
  • Die casting, continues casting and Centrifugal casting
  • Welding Process: Gas welding, Arc welding, Resistance welding; Thermit Welding: Soldering, grinding wheel
  • Gear generation processes
  • Electric discharge machinery
  • Ultrasonic machining
  • Electrochemical grinding
  • Forming processes
  • Hot and Cold working
  • Rolling
  • Punching blanking
  • Shearing.
Mesurement and Measuring Instruments
  • Static and dynamic characteristics
  • Classification of electrical measuring instruments
  • Deflection torque and methods of production
  • Controlling torque and controlling system
  • Damping torque & methods of damping
  • Different types of instruments
  • Construction & operating principle
  • Merits and demerits
  • Errors and remedies
  • Thermocouple instruments
  • Digital instruments: Voltmeter, ammeter, multimeter, energy-meter
  • Measurement of Displacement and Strain: Wire wound potentiometer, LVDT, strain gauges and their different types such as inductance type, resistive type, wire and foil type etc. Gauge factor, gauge materials, and their selections.
Engineering Materials
  • Introduction of Engineering materials
  • Ferrous materials, alloying materials, Non-Ferrous metals, aluminum and its alloys
  • High speed steel
  • Plastic materials, hardening and hardening processes
  • Time temperature transformation curve
Basics of Managements
  • Leadership
  • Motivation
  • Ethics and Values
  • Team related skills- sympathy, empathy, co-operation, concern, lead and negotiate, work well with people from culturally diverse background
  • Communication in group - conversation and listening skills
  • Task Initiation
  • Task Planning
  • Task execution.
 

Also Read:

UPPSC AE Salary UPPSC AE Syllabus UPPSC AE Exam Pattern
PPSC JE Eligibility UKSSSC JE Eligibility PPSC JE Syllabus

 

PPSC JE Syllabus:Mental Ability

  • Simplification
  • Ratio and Proportion
  • Averages
  • L.C.M. and H.C.F.
  • Time and Work
  • Time and Distance
  • Partnership
  • Height and Distance
  • Simple and Compund Interest
  • Mensuration
  • Number System
  • Mixture and Allegation
  • Boats and Stream
  • Probability
  • Permutation and Combination
 

PPSC JE Syllabus: Logical Reasoning

  • Coding-Decoding
  • Analogies
  • Statement and Arguments
  • Statement and Conclusion
  • Statement and Assumption
  • Data Interpretation
  • Non-Verbal Reasoning
  • Clocks and Calendars
  • Blood Relations
  • Syllogism
  • Mirror Images
  • Number Series
 

PPSC JE Syllabus: General Awareness

  • Current Affairs
  • Indian Culture
  • Indian Polity
  • Indian Economy
  • Important dates and days
  • Countries and Capitals and Currencies
  • Geography
  • Books and Authors
  • Inventions and Discovries
  • Sports
  • Science and Technology
  • General Science

Attempt Free Mock Tests- Click Here
 

PSSC JE Exam Pattern

Candidates have to undergo a written examination followed by character verification to be appointed as Junior Engineer. The written exam has a definite pattern the details of which are given below. 

A total of 120 questions are asked which make the paper a total of 300 marks. There are two sections- the first one being subject specific as chosen by the candidate and the section section has questions from four different subejcts/seb-sections. 2.5 marks are awarded for every correct answer. There is no negative marking in the exam.

Section

Maximum Question

Maximum Marks

Civil/Mechanical 

100

250

Logical

Reasoning, Mental ability and

General Knowledge 

20

50

Total

120

300



Candidates can go through the above details regarding PPSC JE Syllabus and Exam Pattern and start their preparation today.
 

 

Read More

Also Read:

Air Force Group X Syllabus Haryana Police Constable Syllabus Rajasthan Police SI Syllabus
SSC JE Syllabus UPSSSC JE Syllabus ESIC UDC Syllabus

What is the syllabus for PPSC JE Exam?

For the Civil posts syllabus consists of important topics like Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering, Structural Engineering.

What is the exam pattern for PPSC JE Exam?

The PPSC JE Exam comprises of one written exam only.

What are the sections in PPSC JE Exam?

The section in PPSC JE Exam are Civil/Mechanical , Logical, Reasoning, Mental ability andGeneral Knowledge.

What are the maximu possible marks in PPSC JE Exam?

The maximum possible marks in PPSC JE Exam are 300.

What is the syllabus for General Awareness in PPSC JE Exam?

The syllabus for PPSC JE Exam is:
  • Current Affairs
  • Indian Culture
  • Indian Polity
  • Indian Economy
  • Important dates and days
  • Countries and Capitals and Currencies
  • Geography
  • Books and Authors
  • Inventions and Discovries
  • Sports
  • Science and Technology
  • General Science

Free Demo Classes

Register here for Free Demo Classes

Trending Courses

Master Certification in Digital Marketing  Programme (Batch-17)
Master Certification in Digital Marketing Programme (Batch-17)

Now at just ₹ 64999 ₹ 12500048% off

Professional Certification Programme in Digital Marketing (Batch-11)
Professional Certification Programme in Digital Marketing (Batch-11)

Now at just ₹ 49999 ₹ 9999950% off

Advanced Certification in Digital Marketing Online Programme (Batch-29)
Advanced Certification in Digital Marketing Online Programme (Batch-29)

Now at just ₹ 24999 ₹ 3599931% off

Advance Graphic Designing Course (Batch-12) : 100 Hours of Learning
Advance Graphic Designing Course (Batch-12) : 100 Hours of Learning

Now at just ₹ 19980 ₹ 3599944% off

Flipkart Hot Selling Course in 2024
Flipkart Hot Selling Course in 2024

Now at just ₹ 10000 ₹ 3000067% off

Advanced Certification in Digital Marketing Classroom Programme (Batch-3)
Advanced Certification in Digital Marketing Classroom Programme (Batch-3)

Now at just ₹ 29999 ₹ 9999970% off

Basic Digital Marketing Course (Batch-24): 50 Hours Live+ Recorded Classes!
Basic Digital Marketing Course (Batch-24): 50 Hours Live+ Recorded Classes!

Now at just ₹ 1499 ₹ 999985% off

WhatsApp Business Marketing Course
WhatsApp Business Marketing Course

Now at just ₹ 599 ₹ 159963% off

Advance Excel Course
Advance Excel Course

Now at just ₹ 2499 ₹ 800069% off